Home of the EZ Hauler
Made in the USA.
- 400 Industrial Drive Dunkirk, IN 47336
- 765.768.5000
- Fax: 765.768.5015
EZ Hauler 2200 Transformer Dolly
EZ HAULER 2200 Transformer Dolly
The EZ Hauler 2200 Transformer Dolly can lift 2200 pounds. It has a vertical reach of 24 feet, and when collapsed is under 6 feet in height. The EZ Hauler 2200 Transformer Dolly is Tier IV Compliant.
A Utility Company's Ace-In-The-Hole
The EZ Hauler 2200 Transformer Dolly is the next evolution in compact design, and is built to maximize power in a small footprint. The EZ Hauler 2200 Transformer Dolly can lift 2,200 pounds, and can extend to more than 24 feet. The overall height (when collapsed) is 5 feet 8 inches and the length is 12 feet (including crane – when collapsed). For work that demands both power and maneuverability, count on the EZ Hauler 2200 Transformer Dolly to finish the job.
Features
Options
- 2200 lb. lifting capacity with overload protection
- 2500 lb. carrying capacity
- 25 HP diesel engine
- 24 ft. sheave height
- Hydraulic adjustment of track drive
- Proportional remote control
- Remote drive
- Stable during travel to 25º side slope
- Outrigger Interlocks
- Chassis tilt angle alarm
- Boom stow interlock
- Lower tool reel with 15 ft. hose
- 9,000 lb. electric recovery winch
- 1500 watt inverter
General Specifications
- Engine: Yanmar Mnimax, 3 – Cylinder Water – Cooled 1640 cc Diesel 25 HP @ 3600 RPM. Fully tier IV compliant
- Hydraulic Pump: Fixed displacement gear type, 10 gallons (37 liters) per minute
- Hydraulic track drive with skid steering
- Hydraulically extended tracks
- 24 ft. (7.3M) boom to tip height
- Full 360 degree work zone
- 2200 lb. (998 kg) lifting capacity
- Fully proportional remote for crane and drive functions
- Meets or Exceeds ANSI and SAE Requirements
Dimensions
- Length — **Overall, length, including crane, is 12’** (3.66M). **Chassis length is 9′ – 10″** (3.0M).
- Length with outriggers fully extended is 15′ (4.57M).
- Width — Overall, width of the tracks extended is 51″ (129cm). Width without the tracks extended is 35″ (88cm).
- Width with the outriggers fully extended is 6ft (1.82M).
- Height — Overall, height, including crane, is 5′ – 8″ (1.87M). **Chassis height is 47″** (103.4cm).
Other Features
- 24 ft. (7.3M) working height
- Crawler tracks – Rubber 9.5″‘ (24 cm) wide, five idler wheels on each side.
- Crawler Drive Motors – Integrated orbit hydraulic motor
- Transport Bed – 42″L x 35″W (107cm L x 90cm W), Capacity: 2500 lbs. (1134kg)
- Controls: Wireless Radio Remote
- Main Boom: 80 degree above to 0 degree below horizontal hydraulic boom elevation
- Planetary gear winch rated 4000 lbs. (1820kg) line pull
- Winch line, equipped with 3/8″ 65ft. (9.5mm) polyester ropes.