EZ Hauler 2200

EZ Hauler 2200

The EZ Hauler 2200 can lift 2200 pounds.  It has a vertical reach of 24 feet, and when collapsed is under 6 feet in height.  The EZ Hauler 2200 is Tier IV Compliant.

A Utility Company's Ace-In-The-Hole

The EZ Hauler 2200 is the next evolution in compact design, and is built to maximize power in a small footprint. The EZ Hauler 2200 can lift 2,200 pounds, and can extend to more than 24 feet. The overall height (when collapsed) is 5 feet 8 inches and the length is 12 feet (including crane - when collapsed). For work that demands both power and maneuverability, count on the EZ Hauler 2200 to finish the job.

Features

  • 2200 lb. lifting capacity with overload protection
  • 2500 lb. carrying capacity
  • 25 HP diesel engine
  • 24 ft. sheave height 
  • Full continuous rotation and unlimited work zone
  • Auger stored on side of boom 
  • Hydraulic Pole Guide
  • Hydraulic adjustment of track drive 
  • Positive +80º boom elevation to -10º boom elevation
  • Fully proportional remote control
  • Remote drive
  • Stable during travel to 25º side slope

Options
  • Pressure and flow adjustable hydraulic tool circuit
  • Bucket (24 ft. working height)
  • Hydraulic tools
  • Custom-built transporter trailer
  • 12V recovery Winch
General Specifications
  • Engine: Yanmar Mnimax, 3 - Cylinder Water - Cooled 1640 cc Diesel 25 HP @ 3600 RPM. Fully tier IV compliant
  • Hydraulic Pump: Fixed displacement gear type, 14 gallons (53 liters) per minute
  • Hydraulic track drive with skid steering
  • Hydraulically extended tracks
  • 24 ft. (7.3M) boom to tip height
  • Full 360 degree continuous rotation
  • 2200 lb. (998 kg) lifting capacity
  • Fully proportional remote for crane and drive functions
  • Meets or Exceeds ANSI A92.2-2001, A10.31-1995, and SAE Requirement 
  • Meets 46kv category C dielectric qualifcations
Dimensions
  • Length -- **Overall, length, including crane, is 15'** (4.57M). **Chassis length is 9' - 10"** (3.0M).
  • Length with outriggers fully extended is 12' (3.74M). 
  • Width -- Overall, width of the tracks extended is 52" (132cm). Width without the tracks extended is 34" (86cm).
  • Width with the outriggers fully extended is 12ft (3.74M).
  • Height -- Overall, height, including crane, is 5' - 8" (1.87M). **Chassis height is 47"** (103.4cm).
  • **Height with the outriggers fully extended is 94"** (207cm).
Other Features
  • Pin on bucket with 300 lb. (135kg) capacity - 34 ft. (13.4M) working height
  • Crawler tracks - Rubber 12' (30 cm) wide, five idler wheels on each side.
  • Crawler Drive Motors - Integrated orbit hydraulic motor
  • Transport Bed - 42"L x 35"W (107cm L x 90cm W), Capacity: 2500 lbs. (1134kg)
  • Controls: Wireless Radio Remote
  • Main Boom: 80 degree above to -10 degree below horizontal hydraulic boom elevation
  • Planetary gear winch rated 4000 lbs. (1820kg) line pull
  • Winch line, equipped with 1/2" 100ft. (12mm) polyester ropes.
  • Auger: stored on side of boom with latching mechanism for transport
  • Auger Drive: Sealed planetary gear reduction - 3500 ft. /lbs. (3745 N-M) torque. (5000 ft./lbs. optional)
  • Auger Bit: 18" (46 cm) diameter standard with 2" hex output shaft. (2.5" optional)