EZ Hauler 55MLP

Mini-Digger Derrick

With the EZ Hauler 55 MLP you can lift 5500 pounds, but still fit the entire unit through a 36" opening.  Try taking a line truck through a 36" opening!

A Utility Company's Ace-In-The-Hole

The EZ Hauler 55MLP is designed to do what a line-truck can do, but is able to work in confined spaces and hard to navigate areas. The EZ Hauler is designed to do what a line-truck can do, but is able to work in confined spaces and hard to navigate areas. The EZ Hauler is able to carry multiple utility poles and transformers to the job site for you.

EZ Hauler - The "original" mini-digger derrick

Defined and Refined

Yes.  We invented the mini-digger derrick.  That doesn't stop us from continuing to improve and lead the industry.  Not because we want recognition or accolades, but because we want you to have the best possible equipment to help you with your dangerous job.
Highly Developed

All-In-One design means you have the right tool in the right place at the right time.

Innovative

Our unique EZ-RTS (Retractable Track System) allows the unit to fit in tight places.

Flexible

Robust controls (including remote control)  provides superior utility pole construction.

Safety

Exceeding expectations and finding new ways to protect our most valuable resource... you!

Ready for More? Contact a Dealer Today.


Test
Features
  • 5500 lb. lifting capacity with overload protection
  • 3000 lb. carrying capacity
  • 25 HP diesel engine
  • 42 ft. sheave height
  • Insulated to 46 KV category C
  • Full continuous rotation and unlimited work zone
  • Auger stored on side of boom
  • Hydraulic Pole Guide
  • Hydraulic adjustment of track drive
  • Positive +80º boom elevation to -10º boom elevation
  • Fully proportional remote control
  • Stable to 20º side slope
Options
  • Pressure and flow adjustable hydraulic tool circuit
  • Remote Drive
  • Bucket (44 ft. working height)
  • Hydraulic tools
  • Custom-built transporter trailer
  • Transformer/ Jib Winch
General Specifications
  • Engine: Yanmar Mnimax, 3 Cylinder, Water cooled 1640 cc Diesel 25 HP @ 3600 RPM.  Fully tier IV compliant
  • Hydraulic Pump: Fixed displacement gear type, 14 gallons (53 liters) per minute
  • Hydraulic track drive with skid steering
  • Hydraulically extended tracks
  • 41 ft.(12.5 M) boom to tip height
  • Full 360 degree continuous rotation
  • 5500 lb. (1725 kg) lifting capacity
  • Fully proportional remote for crane and drive functions
  • Meets or Exceeds ANSI A92.2-2001, A10.31-2006, and SAE Requirement
  • Meets 46kv category C dielectric qualifcations
Dimensions
  • Length -- Overall, length, including crane, is 17ft. (5.2M). Chassis length is 10' - 6"(3.2M).
  • Length with outriggers fully extended is 13' - 6"(4.1M)
  • Width -- Overall, width of the tracks extended is 51" (132cm). Width without the tracks extended is 35.5" (90cm).
  • Width with the outriggers fully extended is 11ft (3.35M).
  • Height -- Overall, height, including crane, is 6' - 10" (2.1M). Chassis height is 47" (103cm).
  • Height with the outriggers fully extended is 62" (124.44cm).
Other Features
  • Pin on bucket with 300 lb. (135kg) capacity - 44 ft. (13.4M) working height
  • Crawler tracks - Rubber 12' (30 cm) wide, five idler wheels on each side.
  • Crawler Drive Motors - Integrated orbit hydraulic motor with single stage planetary drive gear.
  • Transport Bed - 47"L x 35.5"W (124cm L x 90cm W), Capacity: 3000 lbs. (1135kg)
  • Controls: Wireless Radio Remote
  • Main Boom: 80 degree about to -10 degree below horizontal hydraulic boom elevation
  • Extensions: Three hydraulically operated steel sections and one manually extended fiberglass section with hydraulic pole guide.
  • Winch line, equipped with 9/16" 100ft. (12m) polyester ropes.
  • Auger: stored on side of boomwith latching mechanism for transport
  • Auger Drive: Sealed planetary gear reduction - 3500 ft. /lbs. (3745 N-M) torque. (5000 ft./lbs. optional)
  • Auger Bit: 18" (46 cm) diameter standard with 2" hex output shaft. (2.5" optional)